AIKO STELLAR 1N+72 635W–660W Bifacial Solar Panel
The AIKO STELLAR 1N+72 solar panel is a high-power bifacial photovoltaic module designed for utility-scale solar farms and other large PV installations. The series combines N-Type ABC cell technology with a dual-glass structure and offers six power ratings from 635W to 660W.
With module efficiency reaching 24.4%, the STELLAR 1N+72 series helps increase installed capacity within a limited project area. Its bifacial design can also generate additional energy from light reaching the rear side of the module, subject to ground reflectivity, mounting height, row spacing and site conditions.
Key Features
- 635W–660W power range: Six models are available for different PV system requirements.
- N-Type ABC cells: All Back Contact cell technology removes front-side busbars and increases the active light-receiving area.
- Up to 24.4% efficiency: High module efficiency supports greater installed capacity per unit of land.
- Bifacial power generation: A 75±5% bifacial factor enables rear-side energy generation under suitable installation conditions.
- Dual-glass construction: The module uses 2.0+2.0 mm coated semi-tempered glass.
- Better temperature performance: The Pmax temperature coefficient is −0.26%/°C.
- 1500V DC system compatibility: Suitable for the electrical design of large-scale PV systems.
- Long-term warranty: 15-year product warranty and 30-year linear performance warranty.
N-Type ABC Cell Technology
ABC means All Back Contact. The electrical contacts are positioned on the rear side of the solar cells, leaving the front surface free from conventional metal grid lines. This design increases the effective light-receiving area and gives the module a clean, uniform appearance.
The STELLAR 1N+72 module contains 144 N-Type ABC cells in a 6 × 24 configuration. Its electrical design provides a positive power tolerance of 0 to +3%, helping ensure that the delivered module power is not below the rated output under standard test conditions.
Bifacial Dual-Glass Design
The module uses a bifacial dual-glass structure with a specified bifacial factor of 75±5%. In a properly designed installation, reflected sunlight can reach the rear side of the module and contribute additional power generation.
Actual bifacial gain is not a fixed percentage. It depends on ground albedo, module height, tilt angle, row spacing, shading and other site-specific factors. A project simulation should therefore be completed before estimating total system energy yield.
Technical Specifications
| Model | AIKO-G635- MCH72Dw |
AIKO-G640- MCH72Dw |
AIKO-G645- MCH72Dw |
AIKO-G650- MCH72Dw |
AIKO-G655- MCH72Dw |
AIKO-G660- MCH72Dw |
|---|---|---|---|---|---|---|
| Electrical Data | ||||||
| Rated Power (Pmax) | 635 W | 640 W | 645 W | 650 W | 655 W | 660 W |
| Open-Circuit Voltage (Voc) | 53.70 V | 53.80 V | 53.90 V | 54.00 V | 54.10 V | 54.20 V |
| Maximum Power Voltage (Vmp) | 45.00 V | 45.10 V | 45.20 V | 45.30 V | 45.40 V | 45.50 V |
| Short-Circuit Current (Isc) | 14.88 A | 14.94 A | 15.00 A | 15.06 A | 15.12 A | 15.18 A |
| Maximum Power Current (Imp) | 14.12 A | 14.20 A | 14.27 A | 14.35 A | 14.43 A | 14.51 A |
| Module Efficiency | 23.5% | 23.7% | 23.9% | 24.1% | 24.2% | 24.4% |
| Power Tolerance | 0 to +3% | |||||
| Test Conditions | STC: 1000 W/m², Cell Temperature 25°C, AM1.5 | |||||
| Module Specifications | ||||||
| Product Series | AIKO STELLAR 1N+72 | |||||
| Series Code | AIKO-G-MCH72Dw | |||||
| Cell Type | N-Type ABC | |||||
| Number of Cells | 144 Cells (6 × 24) | |||||
| Module Structure | Bifacial Dual-Glass | |||||
| Glass | 2.0 + 2.0 mm Coated Semi-Tempered Glass | |||||
| Frame | Anodized Aluminum | |||||
| Dimensions (L × W × H) | 2382 × 1134 × 30 mm | |||||
| Weight | 32.3 kg ±3% | |||||
| Bifacial Factor | 75±5% | |||||
| Junction Box | IP68, 3 Bypass Diodes | |||||
| Connector | MC4 Compatible / Original MC4-EVO2A | |||||
| Cable | 4 mm² (IEC) / 12 AWG (UL) | |||||
| Temperature and System Ratings | ||||||
| Pmax Temperature Coefficient | −0.26%/°C | |||||
| Voc Temperature Coefficient | −0.22%/°C | |||||
| Isc Temperature Coefficient | +0.05%/°C | |||||
| Operating Temperature | −40°C to +85°C | |||||
| Maximum System Voltage | 1500 V DC | |||||
| Maximum Series Fuse Rating | 30 A | |||||
| Protection Class | Class II | |||||
| Fire Rating | IEC Class A | |||||
| Mechanical Load | ||||||
| Maximum Front Static Load | 5400 Pa | |||||
| Maximum Rear Static Load | 2400 Pa | |||||
| Hail Test | 25 mm Diameter Hail at 23 m/s | |||||
| Warranty and Performance | ||||||
| Product Warranty | 15 Years | |||||
| Linear Performance Warranty | 30 Years | |||||
| First-Year Degradation | ≤1% | |||||
| Annual Degradation, Years 2–30 | ≤0.35% per Year | |||||
| Packaging Information | ||||||
| Modules per Pallet | 36 Modules | |||||
| 20 ft Container | 144 Modules | |||||
| 40 ft High-Cube Container | 720 Modules | |||||
Specifications are based on the AIKO STELLAR 1N+72 official datasheet. AIKO reserves the right to update product specifications without prior notice.
Recommended Applications
- Utility-scale solar power plants
- Ground-mounted photovoltaic systems
- Large commercial and industrial solar projects
- Agricultural and open-field solar installations
- Projects requiring high power density and bifacial energy generation
Warranty and Long-Term Performance
The AIKO STELLAR 1N+72 series carries a 15-year product warranty and a 30-year linear performance warranty. The specified first-year degradation is no more than 1%, followed by annual degradation of no more than 0.35% from years 2 through 30.
Final warranty coverage is subject to AIKO’s current warranty document, installation requirements and applicable sales conditions. Buyers should confirm the applicable warranty terms for the destination market before placing an order.
Ordering and Project Support
Please provide the required power rating, order quantity, project location, delivery destination and expected installation date when requesting a quotation. For utility-scale projects, information about the inverter model, string design, mounting structure and environmental conditions will help us confirm system compatibility.
FAQ
What is the power range of the AIKO STELLAR 1N+72 solar panel?
The series includes 635W, 640W, 645W, 650W, 655W and 660W models.
Is this an N-Type solar panel?
Yes. The module uses N-Type ABC, or All Back Contact, solar cell technology.
Is the STELLAR 1N+72 a bifacial module?
Yes. It is a bifacial dual-glass module with a specified bifacial factor of 75±5%.
What is the maximum module efficiency?
The 660W model reaches a maximum module efficiency of 24.4% under Standard Test Conditions.
Can this module be used in a 1500V solar system?
Yes. Its specified maximum system voltage is 1500V DC. String voltage, inverter limits and local electrical requirements must still be checked during system design.
What are the dimensions and weight?
Each module measures 2382 × 1134 × 30 mm and weighs 32.3 kg with a tolerance of ±3%.
How much additional energy can the rear side generate?
There is no single fixed bifacial gain. Rear-side generation depends on ground reflectivity, installation height, tilt angle, spacing, shading and local environmental conditions.
What warranty is provided?
AIKO specifies a 15-year product warranty and a 30-year linear performance warranty for this series, subject to the manufacturer’s warranty terms.
Which model should I select?
Model selection depends on required project capacity, module availability, inverter input limits, string design, installation area and target system voltage. Contact us with the project details for model confirmation and a quotation.
